By plugging the pipe toward the distributing valve the automatic brake will be restored.

The automatic brake activated and almost immediately the fault protection process switched off the icemobile.

Name the different positions of the automatic brake valve.

To release the locomotive brake when the automatic brake valve is in other than running position.

What must be done if the pipe between the feed valve and automatic brake valve breaks?

A brake application made by the automatic brake valve cannot be released by the independent brake valve.

They designed an automatic brake which would release the cable instantly upon the strain becoming too great.

If the locomotive brake released with the automatic brake valve in lap position, where is the trouble?

In what position should the automatic brake valve handle be placed when adjusting the excess pressure head?

If the pipe leading from the automatic brake valve to the governor breaks, what should be done?

If the brake cylinder pipe breaks, can the locomotive brake be applied with the automatic brake valve?

With the automatic brake valve in release, running, or holding position, does the maximum pressure head operate?

How is the automatic brake applied?

The application cylinder pipe connects the application cylinder of the distributing valve with the independent and automatic brake valves.

Can the locomotive brake be released by the automatic brake valve in release position, when using the H-6 valve?

His propeller, his smoke-consumer, and his automatic brake were valuable commercial properties, but had all slipped from his control.