We are using cookies This website uses cookies in order to offer you the most relevant information. By browsing this website, you accept these cookies.
An optimal memory parameter was found that still minimized the RMSE and could be used for all functions and subjects.
2
The R2 and RMSE between LAI inversion value and true value were 0.7287 and 0.2971 respectively.
3
This reduction in RMSE resulted from changes in the parameters linked to the increased steepness of the QT-RR relation after hysteresis reduction.
4
The trajectory of the clubhead was found to fit to an ellipse with RMSE of 1.2 mm.
5
Root Mean Square Error (RMSE) of image is calculated to study the convergence of reconstructed images compared with the truth image.
1
Refinement of the Bcl-xL structure to a backbone rmsd of 0.95 A was accomplished with data collected in an additional 3 days.
2
During this search, the RMSD values for all chemically relevant pairings are calculated by quaternion algebra.
3
The root-mean-square deviation (RMSD) of the conductance signatures for the PZT patch were used as the looseness-monitoring indexes.
4
Taking RMSD values of sub-frequency bands and the looseness degrees as inputs and outputs respectively, the BPNNs were trained and tested in twenty repeated experiments.
1
The root-mean-squaredeviation between 458 equivalenced C alpha atoms is 1.17 A.
2
The root-mean-squaredeviation (RMSD) of the conductance signatures for the PZT patch were used as the looseness-monitoring indexes.
3
The average root-mean-squaredeviations were found to be 0.756 and 0.804 A, respectively.
4
Root-mean-squaredeviations of 0.61 and 1.16 were observed for the backbone and heavy atoms, respectively.
Usage of root-mean-square error in English
1
The root-mean-squareerror between the extrapolated topography and true extended topography at various diameters was then compared.
2
However, that study was performed outside the MR scanner, and the root-mean-squareerror in the head position measurement was 0.7 mm.
3
Results: The root-mean-squareerrors in the outer extrapolated region ranged from 30 to 220 microm, depending on the fit function used.