1
The doors are put together by means of a tenon and mortise.
2
Six feet long, fourteen inches wide, mortise and tenon joints at both ends.
3
Fit the end and side braces with mortise and tenon joints.
4
With the tenon saw rip and cross cut to these lines.
5
This will prevent the fitting of one tenon into more than one mortise.
6
A tenon should not be so large as to weaken the mortised piece.
7
The mortise for the key is to be placed in the middle of the tenon.
8
The chamber and tenon were used in this work.
9
The mortise hole had apparently got smaller, and still fitted the shrunken tenon to perfection.
10
There is a reason for the shape, size and location of each tenon or mortise.
11
It's been built using dowels and mortise and tenon.
12
This table may be made with mortise and tenon joints or with dowels as desired.
13
The brand also sells Ming Dynasty-inspired wooden furniture assembled only with mortise and tenon joints.
14
Gage the sides of the wedge hole on both upper and lower surfaces of the tenon.
15
They did mortise and tenon joints-allframe houses.
16
In cutting the tenon, first rip-saw just outside the gaged lines, then crosscut at the shoulder lines.