Significados de reamer en inglés

The gauge of the reamer should be at least 1½ diameters.

The reamer should now be used and driven by hand.

A fluted reamer will be found invaluable for enlarging them to the correct size.

This is best done by using a square taper reamer.

An inspection of the chamber-reamer will be generally satisfactory in determining the size and shape of the chamber.

His judgment appeared infallible as to whether he ought to send down a reamer to straighten the kink.

The perfect alignment of the reamer is so important that where power is used this point is apt to be neglected.

Best of Bowers Further reading Facebook Twitter Pinterest There has never been a more exciting time to be shown an acetabulum reamer.

The reamer should be applied at the center, that is, the grooves should be cut on the axis or full diameter of the hole.

To preserve the remnant of the ACL, the rotational direction of the reamer was set to counterclockwise just before perforation of the tibial tunnel.

Should the inspection of guns with conical chambers or slopes take place at the foundry, an examination of the chamber reamer will be very satisfactory.

The blacksmith tools for dressing the reamers are shown in Fig.

For hardening broaches and long reamers and taps, the furnace shown in Fig.

Reamers and taps should be cooled from an ordinary straw color.

He had an extra heater, and there were two reamers.

That estimate comes from Professor Andrew Reamer at the George Washington Institute of Public Policy.