Significados de crosshead em inglês

The rack and pinions are of cast steel, as is also the tiller crosshead.

Besides, the engine crosshead's worn and jumps about.

The syringe plunger is compressed by the crosshead at a set rate, and the force is measured.

The condensers form part of the engine frame, and have guide faces cast on for the crosshead shoes.

This long frame had to be made to accommodate the crosshead which was necessary for such a short cylinder.

Hundreds of inquiries analogous to the following are sent: Who sells a tool for truing up a crosshead wrist?

The tiller, D, as it is carried to starboard or port, slides through a socket, E, pivoted to the crosshead.

The air and circulating pumps are bolted to the back of the condensers, and are worked by levers from the engine crosshead.

The strains are direct and the power and resistance are equalized by the inertia of the crosshead, piston, rods, and fly wheels.

The crosshead runs in guides made from a piece of gas pipe with the sides cut out and threads cut on both ends.

Then pass the rod through the gland and assemble the crosshead and fork on its end, and assemble the guides round the crosshead foot.

One saw the big columns shake and strain as the crosshead shot up and down; the thrust-blocks groaned with the back push of the propeller.

This a straight line direct-acting engine, with steam and air pistons connected to a single rod through a crosshead which connects with two fly wheels.

The downside of screws is that the screwhead can get blocked (especially if you use the crosshead type), making it difficult to remove them later.

O Crosshead on swinging pawl.

Crosshead and Guides.-Thecrosshead (Figs.