Ainda não temos significados para "bevel off".
1If it won't enter, bevel off the sides of the cut very slightly till it will.
2Then bevel off the outside corners and smooth them-aswell as the rest of the woodwork-withfine glass paper.
3If it is a trifle difficult to pass, bevel off the edge slightly on the inside to make a fairly easy driving fit.
4Then bevel off the end to 45 degrees and pass the tube through again, bringing the bevel up against the bottom hole from the inside.
5Bevel off one end, and solder this to the plate.
6Bevel off the ends of the last inside to allow the valve to enter easily.
7A drop of the solution evaporated leaves crystals, either tetrahedric, or cubes with edges bevelled off.
8It should be got with a square cutting edge, not beveled off as some are made.
9Details.-Thetongues must be bevelled off to a point on the sides respectively nearest to the continuous rails.
10The rear end of the cylinder should be bevelled off slightly inside, to allow the packed piston to enter easily.
11The ends or the bottom are bevelled off towards the top edge to fit the grooves, so that no part may be above the grooves.
1215 is a similar tool, but called a "corner grounder," as it is beveled off like a corner-chisel.
13Three pieces, about 32 inches long each, have their ends bevelled off at an angle of 60 degrees, and are laid with their ends touching.
Esta colocação é formada por: