1
Both the tail stock and the headstock centerpoints should be hardened.
2
The two bearings in the headstock are of brass.
3
The tuner is tiny, and clips onto the headstock.
4
The headstock is made of two tees, joined by a standard long nipple as shown in Fig.
5
In fact, it looks like nothing so much as Fender's iconic Stratocaster, although the headstock is a little off.
6
This alone is an improvement, as the headstock holds the tuning heads and is where you're attention should be.
7
Just a headstock and partial neck, the Air Guitar features chord buttons and an infrared sensor that detects your strumming-hand's motions.
8
Now it is selling the Self Tuning Guitar, which actually has servo motors on the headstock to turn the tuning heads.
9
The better way is to arrange a lathe with a hollow headstock and a guide which will carry a pod-auger boring in from one end.
10
The instrument he took out was an old Martin D-45 with the pearl inlaid "CD MARTIN" logo on the headstock- aclassic ,pre-warpicker's guitar.
11
Just beyond rose the tapering chimneys and the clumsy black headstocks of Brinsley Colliery.
12
1), where A is the headstock, B the bed and C the tailstock.
13
Both the tail stock and the headstock centerpoints should be hardened.
14
The two bearings in the headstock are of brass.
15
The tuner is tiny, and clips onto the headstock.
16
The headstock is made of two tees, joined by a standard long nipple as shown in Fig.